Request

Products

Adapto-Alu

Adapto-Alu

Adapto-Alu

Adapto-Alu

Three-grade height adjustable student’s chair, light metal design, ÖNORM and GS certified

The framework is of powder-coated, hand-friendly oval metal tubes with in-built 3-step-height adjustment.
Framework material: light metal steel combination (framework upper part incl. sliding seat mechanics of light metal).
The size adjustment consists of the functions: with sitting height and sitting depth adjustment (for sizes 3-4-5 and 4-5-6).
The seat carrier is finished as a frame construction. The sitting surface front edge is protected by a metal round tube, the corner areas of the sitting surface with outstanding corner edge protection parts of synthetic.
The sitting surface is protected by a round steel tube at the seat front edge.
The sitting surface and backrest are of ergonomically shaped beech plywood, 8 mm thick and prime and top coated in natural colours. The sitting surface is finished with a seat pan and a rounding at the seat front edge (r=40 mm).
The backrest is shaped 3-dimensionally with a lumber protuberance as a support of the pelvis in the lumbar vertebral area. During the adjustment of the seat height the size category is indicated on a display (according to EN 1729).
Finishing laminate: Seat and backrest are glued with a 0.5 mm thick, scratch resistant synthetic coating (decoration: grey, beech or maple).
During the adjustment of the seat height the size category is indicated on a display (according to EN 1729).
Chair stackable: 3 pieces (2-3-4), 4 pieces (3-4-5, 4-5-6)
The floor gliders of glass fibre reinforced polyamide are finished as exchangeable gliders with an internal core, the gliding surface is simply clippable into the floor glider as an exchangeable insert. Exchangeable inserts: felt (standard), synthetic (optional). The felt and the soft synthetic gliding surface are directly cast with the support material.

subject to modifications.

Metal colors (frame colors)

Standard powder coating colors for all metal frames made of steel or aluminum.
The surface made of epoxy resin powder is produced in the stoving process.

Standard

RAL 7037 Dusty grey
RAL 7037 Dusty grey
RAL 9006 White aluminium
RAL 9006 White aluminium
RAL 9010  Pure white
RAL 9010 Pure white
RAL 7016 Anthracite grey
RAL 7016 Anthracite grey
RAL 6018 Yellow green
RAL 6018 Yellow green
RAL 5005 Signal blue
RAL 5005 Signal blue
RAL 3003 Ruby red
RAL 3003 Ruby red
RAL 2008 Orange
RAL 2008 Orange
RAL 1023 Traffic yellow
RAL 1023 Traffic yellow

ADAPTO, ALESCO, SOLID - Laminate

Highly compressed and very resistant HPL covering for the seats and backrests of teacher and student chairs.

Thickness: 0.5 mm
Textured surface (FH fine hammer blow)
occupied on both sides

Standard

Laminate Grey
Laminate Grey
Laminate Beech
Laminate Beech
Laminate Marple
Laminate Marple
Size categories
Design
Student’s chair 4309AL
Size category 2-3-4, framework top made of light metal, seat and backrest made of beech plywood, seat height 30, 34 an 38 cm, ÖNORM and GS certified.
ID: 60937
add to wishlist
Student’s chair 4309AL
Size category 3-4-5, framework top made of light metal, seat and backrest made of beech plywood, seat height 34, 38 an 42 cm, ÖNORM and GS certified.
ID: 68054
add to wishlist
Student’s chair 4309AL
Size category 4-5-6, framework top made of light metal, seat and backrest made of beech plywood, seat height 38, 42 an 46 cm, ÖNORM and GS certified.
ID: 60938
add to wishlist
Student’s chair 4309AL-L
Size category 2-3-4, framework top made of light metal, seat and backrest laminate, seat height 30, 34 an 38 cm.
ID: 73163
add to wishlist
Student’s chair 4309AL-L
Size category 3-4-5, framework top made of light metal, seat and backrest laminate, seat height 34, 38 an 42 cm.
ID: 73165
add to wishlist
Student’s chair 4309AL-L
Size category 4-5-6, framework top made of light metal, seat and backrest laminate, seat height 38, 42 an 46 cm.
ID: 73164
add to wishlist

Please select a colour for this product.

Metal colors (frame colors)

Standard powder coating colors for all metal frames made of steel or aluminum.
The surface made of epoxy resin powder is produced in the stoving process.

Standard

RAL 7037 Dusty grey
RAL 9006 White aluminium
RAL 9010  Pure white
RAL 7016 Anthracite grey
RAL 6018 Yellow green
RAL 5005 Signal blue
RAL 3003 Ruby red
RAL 2008 Orange
RAL 1023 Traffic yellow

ADAPTO, ALESCO, SOLID - Laminate

Highly compressed and very resistant HPL covering for the seats and backrests of teacher and student chairs.

Thickness: 0.5 mm
Textured surface (FH fine hammer blow)
occupied on both sides

Standard

Laminate Grey
Laminate Beech
Laminate Marple

Sample classroom

Your quick way to a complete article overview for your classroom furnishing. Shorten the compilation of your article list by means of our samples.